● Chống sét trên đường điện thoại và đường dữ liệu
● Cắm trực tiếp vào phiến Krone
● Bảo vệ 10 đôi dây và 01 đôi dây
● Chống sét trên đường điện thoại
● Dòng tải 350mA, 20kA 8/20μs
Downloads:
Tài liệu thiết bị chống sét LPI TLP-K10: View / Download
Tài liệu tổng: View / Download
Ordering Code
TLP - K10
Configuration:
10 pair plug in module
Protection Stages:
Gas arrester / series impedance / Silicon Protection
Bandwidth:
144 kbits/s (1MHz)
DC Breakdown:
190-276V line to earth
190-262 V line to line
Max working voltage:
190V line to earth
190V line to line
Surge rating:
a+b-e 20kA (8/20µs)
a-b or a-e 10kA (8/20µs)
Typical Let-through Volt-age:
240V @ 5kV (10/700µs)
Max Line Current:
150mA @ 25°, 110mA @ 65°C
AC discharge current:
a+b-e 10A @ 50Hz for 1second
Return loss:
>23dB @ 1MHz 120Ω
Loop resistance:
6.6 Ω nominal
Insertion loss:
<3dB at 120 Ω, 1MHz
Insulation Resistance:
> 5M Ω @ 190Vdc line to ground and line to earth
Dimensions
119mm long x 20mm high
45mm from front of KRONE* Series 2 block when plugged in
Weight
80 g
Connection:
PCB plug in, to Krone LSA* disconnect block
Earthing:
Via spring clips to KRONE* frame
Temperature range
0 - 45°C, 10 – 90% RH
Location
Krone LSA-Plus* disconnect block MDF or IDF. BD & CD as stipulated in the Australian Standards.