Home > Thiết bị chống sét - Tiếp địa > Chống sét lan truyền LPI > Tủ cắt lọc sét một pha LPI > tủ cắt lọc sét 1 pha dòng tải 125A

tủ cắt lọc sét 1 pha dòng tải 125A

SF1125A-NEC-SS480, tủ cắt lọc sét 1 pha, dòng tải 125A, lắp nối tiếp CB, dòng sét sơ cấp 160kA, thứ cấp 40kA, chịu áp tối đa 480V, có bộ đếm, Thiết bị cắt lọc sét SF 1 pha, 125A, 480 Uc bảo vệ cấp II (thứ cấp) ứng dụng cho P-N, 160kA 8/20μs bảo vệ phía đường dây, 40kA 8/20μs bảo vệ phía phụ tải cho mỗi pha, 100kA10/350μs N-E, chống quá tải, LPI SF1125A-NEC-SS480, SF1125A – NEC – SS480, LPI SF1125A – NEC – SS480, tủ cắt lọc sét 1 pha 125A, phân phối tủ cắt lọc sét LPI SF1125A-NEC-SS480, chống sét

Thiết bị cắt lọc sét SF 1 pha, 125A ,480 Uc bảo vệ cấp II (thứ cấp) ứng dụng cho P-N, 160kA 8/20μs bảo vệ phía đường dây, 40kA 8/20μs bảo vệ phía phụ tải cho mỗi pha. 100kA10/350μs N-E, màn hình hiển thị trạng thái LED,chống quá tải, cảnh báo bằng âm thanh và hình ảnh.

Tủ cắt lọc sét 1 pha, dòng tải 125A, lắp nối tiếp CB, dòng sét sơ cấp 160kA, thứ cấp 40kA, chịu áp tối đa 480V, có bộ đếm

Xuất xứ: Úc

Hãng: LPI

Downloads: 

Tài liệu thiết bị chống sét LPI SF1125A-NE-SS480: View / Download

Tài liệu tổng 1: View / Download

Tài liệu tổng 2: View / Download

LPI® SG + SS480 Spark Gap Surge Filter

Features
• High performance surge protector for an operating voltage of 200 - 277Vac
• Encapsulated spark gap and SS480 technology capable of operation under fault /overvoltage conditions up to
480Vac.
• Three stage protection provides highest level of protection for sensitive electronic equipment

Product Description

• Designed to suit TT, TN-C, TN-S, TN-C-S & IT distribution systems
• Ferro cored inductors – dv/dt and di/dt of the incoming surge will be reduced by 1000 times
• High primary 50kA 10/350μs, (135kA 8/20μs) and secondary 40kA
8/207s surge protection (Total of 175kA 8/20μs per phase).
• High N - E protection rating– 100kA 10/350μs, 150kA 8/20μs
• Status indicator, remote alarm contact and optional surge counter

Electronic equipment is highly susceptible to damage from lightning and other transient pulses (including man made switching transients), which arrive via the powerlines through direct strike, or inductive, capacitive coupling. Efficient filtering and clamping at the point of entry of power feeds to sensitive electronic equipment is essential to mitigate physical equipment damage, loss of operations and economic loss.

The LPI SG+SS480 Series Surge Filter provides multiple stage protection against incoming surges & transientsand shall be installed in series with the incoming mains power supply to the equipment or building.Shunt-only clamping alone is not sufficient, as it does not limit the excessive wavefront characteristic of the pre-clamped waveform. The LPI Surge Filter will reduce the rate of rise of voltage (dv/dt) to below 15V/μs as per AS1768 Cat B 3kA (8/20μs) applied impulse and to below 30V/μs for AS 1768 Cat C 20kA(8/20μs) applied impulse.

The SG+SS480 series filter is designed for multistroke lightning events and is supplied with spark gaps as the primary protection between Phase and Neutral rated at 50kA 10/350μs (135kA 8/20μs).

The second stage consists of ferro-cored inductors and capacitors (L-C Filtering) which further attenuates the let-through voltage already clamped by the primary stage. Ferro-cored inductors are used as they are much smaller than non-saturating air-cored inductors. Unlike primary MOV protection, the let through voltage of Spark Gaps remain high for only a few microseconds and hence ferro-cored inductors are a practical alternative. 

The filter attenuates noise and any harmonics present on the power system and is designed to attenuate transverse and common mode noise. The third stage consists of SS480 diverters connected across the load side, these are designed to suppress surges generated by load side equipment.

LPI SG+SS480 filter limits the voltage differential due to a lightning induced impulse between phase and neutral as well as from neutral to ground. Thus providing both common mode and differential (transverse) mode protection. Neutral to earth protection rated at 100kA 10/350μs, 150kA 8/20μs, is provided to limit feedback currents if the site earth goes high potential with respect to the sub-station or transformer earth. This is a common occurrence due to a near-by direct strike.

 

Description

LPIR SG+SS480 Series Surge Filters

Rated voltage:

200 – 277Vac Ph - N @ 50/60Hz

Max continuous fault voltages @ 50/60Hz:

480Vac

Operating time:

< 1ns

Power distribution systems:

TT, TN-S, TN-C, TN-C-S (MEN)

Primary surge protection rating per phase:

50kA 10/350μs (135kA 8/20μs) single shot surge capacity between Phase and Neutral

Secondary surge protection rating per phase:

40kA 8/20μs single shot surge capacity between Phase and Neutral

Total surge protection per phase:

175kA 8/20μs

N – E protection:

100kA 10/350μs, 150kA 8/20μs

Protection Modes:

Transverse and common mode

Inductor:

Ferro cored, low pass, power and noise filtering

Capacitor type:

Self healing polypropylene

Surge counter (Optional**):

7 Digit electro mechanical display

Current crest factor:

> 3:1

Voltage drop:

< 2V at full load

Efficiency:

99%

Frequency response:

3dB point below 3000Hz

Performance:

Typical let-through voltage for all models < 2 x mains peak voltage

Standards (Primary and secondary):

IEC 61643-1

Standards (N - E):

IEC 61643-1

Surge withstand:

 

ANSI/IEEE C62.41 and AS 1768 Cat. A, B and C surge tests

Protection status indication:

Status monitor & remote alarm contacts

Environmental rating:

IP 55

Enclosure:

Metal enclosure with durable polyester powder coat finish

Colour:

Oyster grey

Mounting:

Wall mount

Operating temperatures:

-35 to +50°C, 0 – 95% humidity

Warranty:

5 Years manufacturer’s warranty

 

Ordering Code

 

Ordering Code

Description

Phase

Rated Voltage

Ph - N

Dimensions

(mm)

Weight

(Kg)

SF1125A-NESS480

Surge Filter, 1Ph, 125A, 480V Uc, with Class I protection applied P-N, 50kA 10/3507s, 135kA 8/207s line side protection, 40kA 8/207s load side protection per phase. 100kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

1

200 – 277V

300W x

400Hx150D

12

SF1200A-NESS480

Surge Filter, 1Ph, 200A, 480V Uc, withClass I protection applied P-N, 50kA 10/3507s, 135kA 8/207s line side protection, 40kA 8/207s load side protection per phase. 100kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

1

200 – 277V

300W x

400Hx200D

18

SF3125A-NESS480

Surge Filter, 3Ph, 125A, 480V Uc, with Class I protection applied P-N, 50kA 10/3507s, 135kA 8/207s line side protection, 40kA 8/207s load side protection per phase. 100kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

600W x

500Hx200D

32

SF3200A-NESS480

Surge Filter, 3Ph, 200A, 480V Uc, with Class I protection applied P-N, 50kA 10/3507s, 135kA 8/207s line side protection, 40kA 8/207s load side protection per phase. 100kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

600W x

700Hx200D

50

SF3315A-NESS480

Surge Filter, 3Ph, 315A, 480V Uc, with Class I protection applied P-N, 50kA 10/3507s, 135kA 8/207s line side protection, 40kA 8/207s load side protection per phase. 100kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

600W x

700Hx200D

70

SF3400A-NESS480

Surge Filter, 3Ph, 400A, 480V Uc, with Class I protection applied P-N, 50kA 10/3507s, 135kA 8/207s line side protection, 40kA 8/207s load side protection per phase. 100kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

600W x

700Hx200D

70

SF3630A-NESS480

Surge Filter, 3Ph, 630A, 480V Uc, with Class I protection applied P-N, 50kA 10/3507s, 135kA 8/207s line side protection, 40kA 8/207s load side protection per phase. 100kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

600W x

1000Hx250D

110

SF3800A-NESS480

Surge Filter, 3Ph, 800A, 480V Uc, with Class I protection applied P-N, 110kA 10/3507s line side protection, 40kA 8/207s load side protection per phase. 110kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

1200W x

850Hx200D

180

SF31000A-NESS480

Surge Filter, 3Ph, 1000A, 480V Uc, with Class I protection applied P-N, 110kA 10/3507s line side protection, 40kA 8/207s load side protection per phase. 110kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

1300W x

860Hx210D

190

SF31250A-NESS480

Surge Filter, 3Ph, 1250A, 480V Uc, with Class I protection applied P-N, 110kA 10/3507s line side protection, 40kA 8/207s load side protection per phase. 110kA 10/3507s N-E, Status Indication, LED, Alarm Contacts

3

200 – 277V

1300W x

860Hx210D

195

Add “C” to the part number for Counter. 

Trang chủ